English
www.slendertone.com
18
Description of your unit’s symbols:
There are a number of technical markings on your unit. These can be
explained as follows:
Inside the battery compartment ‘+’ indicates positive polarity and ‘-’
indicates negative polarity. The battery’s position is also shown by an
outline in the base of the compartment.
The unit requires one 9-volt (6F22) DC battery. DC is indicated by the
symbol:
The unit is made in China for Bio-Medical Research Ltd.,
Parkmore Business Park West, Galway, Ireland.
The Output Frequency indicates the number of pulses per second
transmitted by the unit. This is measured in hertz (‘Hz’).
Output (RMSA) means the max. output root mean square current for
each channel.
Output (RMSV) means the max. output root mean square voltage for
each channel.
This symbol means ‘Attention, consult the accompanying
documents’.
This symbol means type BF equipment.
Inside the box, on the back of the unit is the serial number specific to this
unit. The letter preceding the number indicates the year of manufacture,
where “T” denotes 2014, “U” denotes 2015 etc.
!
Slendertone ReVive IM_Layout 1 05/03/2015 14:24 Page 19
To Next Page
Loading...