Slenergy iShare-Home Mini

To Next Page

Product Overview

An iShare-Home Mini system contains package A and B, the packages

are shown below:

35 4

PV1 PV2

Slenergy Technology GmbH

Address: HAMBURGER ALLEE 2-4 60486 FRANKFURT AM MAIN

Email: marketing@slenergy.com Website: www.slenergy.com

Commissioning

Please check if

●

The inverter and mounting structure have been correctly

installed.

●

The inverter’s exposed metal surface has a ground

connection.

●

The resistance between PV arrays and ground is greater

than 1 Mohm.

●

The grid voltage at the point of connection of the inverter is

within the permitted range.

●

The AC circuit breaker must be correctly rater and wired.

PV Connection

System capacity (W) 600/800

1 No. PV modules (pcs)/425W 2

2 Inverter/SL-M600-C/SL-M800-C 1

3 Plug + AC cable+Female 3P Connector 1

4 Mounting Structure set 2

5 DC cable + connector 1.5m × 2

PV1 PV2

Start up

●

Turn on the AC breaker for the branch circuit.

●

Turn on the main AC breaker for the house. Your system will

start to generate power in about 2 minutes.

1. Mount the PV modules above the micro inverter.

2. Connect the PV modules’ DC cables to the DC

input side of the micro inverter.

Quick Installation

Guide

Need help?

Do you have a question about the Slenergy iShare-Home Mini and is the answer not in the manual?

Summary

PV Connection

Commissioning

Checks for correct installation, grounding, resistance, grid voltage, and breaker wiring.

Start up

Steps to turn on AC breaker and main breaker for system power generation.

Product Overview

Structural Installation

Mounting Structure Installation

Guides on unfolding and adjusting the mounting structure for PV modules.

Micro Inverter Installation

Instructions for mounting the micro inverter onto the mounting bracket using specific hardware.

Hook Installation

Details on attaching the hook rubber pad to the hook for securing the structure.

Mounting Structure with Balcony Railing Installation

Bolt Torque

Specifies torque values for different bolt standards (M8x20, M8x50, M8x90) used in installation.

Wiring Installation

AC Connection

Instructions for connecting the AC power plug cable to the local grid network.