What to do if my Slinger Slingshot T-One launcher is not firing?
If your Slinger launcher isn't firing, it could be due to a ball jammed in the feeder tray or wet tennis balls/firing wheel. First, turn off the power and remove any jammed balls. If that's not the issue, ensure you are using dry tennis balls. Turn the power off, wait for the firing wheel to stop completely, then reach in and dry the firing wheel.
Why is the feeder plate not turning on my Slinger Sports & Outdoors?
The feeder plate might not be turning because a tennis ball is jammed or the ball holder is overloaded. To release a jammed ball, follow the instructions for removing jammed balls. For optimal performance, it's recommended to use 72 balls in the ball holder.
General| Category | Slingshot |
|---|---|
| Wrist Brace | Yes |
| Grip Type | Ergonomic |
| Ammo Type | Steel Balls |
| Color | Black |
General safety warnings and precautions for operating the launcher safely.
Critical actions to avoid while operating the Slinger Launcher.
Essential safety precautions to reduce risk of shock, fire, injury, and damage.
Details on the launcher's weight, speed, capacity, battery, and remote control.
Detailed labels and brief descriptions for each part shown in the diagram.
Tips for ensuring optimal battery life and performance.
Step-by-step guide for charging the launcher's battery.
Steps to adjust the ball launching angle using the elevation bar.
Details on the power switch, battery charging, and indicator light functions.
Instructions for resetting the remote and information on guard bars.
Explanation of the controls for adjusting ball speed and feed rate.
Description of the Oscillator status indicator and connection port.
How to use the launcher and oscillator remote control buttons.
Steps to sync a new remote control with the launcher.
Recommended court position and settings for 'Ball Boy' drills.
Recommended court position and settings for beginner drills.
Recommended court position and settings for intermediate drills.
Recommended court position and settings for advanced drills.
Instructions for cleaning the launcher's exterior and interior.
Recommendations for storing the launcher to maintain battery life and performance.
Details regarding the quality control testing performed before shipping.
Actions to take when the ball is not launched.
Actions to take when the feeding plate does not turn.
Actions to take for loud noise and/or vibration issues.
Troubleshooting for battery charging and oscillator not operating.
Information on ball tube issues and how to get a replacement.
To Next Page
