Why is the digital display not turning on for my Slingshot S64?
If the digital display on your Slingshot Coffee Grinder isn't turning on, first, make sure the grinder is switched on and correctly plugged into the power outlet. Also, check that the Coffee Hopper Screw is fully fastened.
What to do if my Slingshot S64 does not start after pressing start?
If the Slingshot Coffee Grinder doesn't start when you press START, check the following: * Ensure the grinder is plugged into a working power outlet. * Confirm the bean hopper is securely locked into position with the Safety Screw tightened. * If the grinder still doesn't start, remove the power plug and let the grinder cool down for 20 minutes before trying again.
Why is the beans icon flashing on my Slingshot Coffee Grinder?
If the beans icon is flashing on your Slingshot Coffee Grinder, it could be due to a few reasons. First, check if the hopper is filled with fresh coffee beans. Also, make sure the hopper sliding gate is open. Finally, ensure that the grinder or bean hopper is not blocked.
How to adjust the grind size if it is not working on Slingshot S64?
If you're finding that the grind adjustment (coarser/finer) on your Slingshot Coffee Grinder isn't taking effect, it might be because the dosing chamber still contains coffee from a previous setting. Make sure to purge the grinder by running it for about 3 grind cycles to clear out the old coffee.
Why is the coffee dosage inconsistent with my Slingshot S64 Coffee Grinder?
If you're experiencing an inconsistent coffee dosage with your Slingshot Coffee Grinder, it could be due to the portafilter not being set up correctly or using the incorrect technique when dispensing coffee into the portafilter. Ensure the portafilter is adjusted correctly.
General| Brand | Slingshot |
|---|---|
| Model | S64 |
| Category | Coffee Grinder |
| Language | English |
Defines intended use and operational limits for professional coffee grinders.
Technical specifications for Slingshot coffee grinder models S64, S75, and C68.
Guide on adjusting the portafilter height for optimal espresso shot delivery.
Explains display information, button functions, timer modes, and indicator lights.
Step-by-step guide to prepare and start the coffee grinder for operation.
How to reset and use the adjustable grinding scale for precise calibration.
Instructions on adjusting coffee dosage using specific rods for single or double portafilters.
How to program a time delay for grinding start in AUTO MODE for consistency.
General safety precautions and warnings for operating the coffee grinder.
Instructions for cleaning the coffee bean hopper using soap and water.
Steps for disassembling and cleaning the grinding burrs and chamber.
Guide to cleaning the coffee ground mixing chamber.
To Next Page
