Do you have a question about the Sloan Optima EBF-85 and is the answer not in the manual?
Flow Rate | 0.5 gpm (1.9 Lpm) |
---|---|
Spout Type | Gooseneck |
Type | Electronic Basin Faucet |
Power Source | Battery |
Finish | Chrome |
Sensor Range | Adjustable |
Activation | Infrared sensor |
Lists various spout assemblies and their corresponding code and part numbers for Optima faucets.
Details different sprayhead flow rates (GPM/Lpm) with their types, codes, and part numbers.
Provides options for faucet trimplates, including sizes and specific part numbers.
Lists control boxes, solenoid assemblies, and power supplies with their codes and part numbers.
Addresses issues when the faucet's IR sensor LED indicator light is red, typically low battery.
Provides steps for when the faucet fails to operate, checking batteries, power, and sensor cables.
Guides users on how to check and manually adjust the sensor detection range for optimal faucet activation.
Explains why a faucet might click but not deliver water, covering water supply, filters, and aerators.
Troubleshoots scenarios where the solenoid does not click and no water flows despite battery installation.
Addresses faucet issues resulting in only a slow flow or dribble when activated.
Diagnoses problems where the faucet continues to drip or deliver water when not in use.
Covers troubleshooting for water temperature problems on faucets connected to hot/cold supply lines.
Provides FAQs and instructions for connecting and using the Sloan Connect mobile application with faucets.