To Next PageTo Next Page
Need help?Do you have a question about the Slugger 2x2 and is the answer not in the manual?
General| Brand | Slugger |
|---|---|
| Model | 2x2 |
| Category | Power Tool |
| Language | English |
Guidelines for selecting and using extension cords with the machine, including gauge and length recommendations.
Initial steps for setting up and preparing the machine for operation, including unpacking and assembly.
Steps and precautions to take before starting a drilling operation, including cutter installation and safety checks.
Procedure for engaging the machine, securing the magnet, and starting the drilling process.
Steps for completing a cut, disengaging the machine, and handling the ejected slug.
Troubleshooting steps for issues with the magnetic base's holding power on the workpiece.
Diagnosing problems when the motor runs but the arbor and spindle do not rotate.
Identifying causes for the motor slowing down during operation, such as cord issues or dull cutters.
Steps to resolve issues with the coolant delivery system, including valve and line checks.
Troubleshooting steps when the cut slug does not eject properly from the cutter bore.
Addressing causes of cutter breakage during drilling, such as coolant application or feed pressure.
Solutions for drilling holes that are not to specification, related to coolant or cutter condition.
