SLV Elektronik DASAR 115 LED User Manual

SLV Elektronik GmbH
BETRIEBSANLEITUNG FÜR
BODENEINBAULEUCHTE
OPERATING MANUAL FOR
RECESSED GROUND LUMINAIRE
MODE D’EMPLOI POUR
ENCASTRÉ DANS LE SOL
INSTRUCCIONES DE SERVICIO PARA
LUMINARIA EMPOTRAR EXTERIOR
ISTRUZIONI DI FUNZIONAMENTO PER
LAMPADA DA INCASSO
GEBRUIKSHANDLEIDING VOOR
GRONDINBOUWLAMP
INSTRUKTIONSVEJLEDNING FOR
NEDGRAVNINGSLAMPE
INSTRUKCJA OBSŁUGI DLA
LAMPA DO MONTAŻU W ZIEMI
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
СВЕТИЛЬНИК ДЛЯ МОНТАЖА В ПОЛУ
BRUKSANVISNING FÖR
MARKLAMPA FÖR INFÄLLD MONTERING
ZEMIN ALTI LAMBA
IÇIN KULLANMA KILAVUZU
DASAR 115 LED
12V~
50-
60Hz
IP65 IP67
229311
LED 3,8W
390lm, 5000K,
CRI 75
0,68 kg
229312
320lm, 3000K,
CRI 75
5mm
min. 80mm
165mm
Ø
9-13mm
20cm
III
0,5h
max
art.-no. 229311/12 02.07.2013 © SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0 Technische Änderungen vorbehalten. Technical
Details are subject to change. Les détails techniques sont sujet à des changements. Nos reservamos el derecho a modificaciones técnicas. Modifiche tecniche riservate. Behoudens technische
wijzigingen. Ret til tekniske ændringer forbeholdes. Zmiany techniczne zastrzeżone. Сохраняется право на внесение технических изменений. Tekniska ändringar kan förekomma. Teknik
değişiklik yapma hakkı saklıdır.

SLV Elektronik DASAR 115 LED Specifications

General

Brand	SLV Elektronik
Model	DASAR 115 LED
Category	Landscape Lighting
Language	English

Summary

Maintenance and Care

Light Source

Information on the LED light source lifespan and replacement in case of damage or failure.

Product Cleaning

Instructions for cleaning the product with a slightly moistened, soft, and fluff-free cloth.

Storage and Disposal

Storage Guidelines

Requirements for storing the product in a dry, clean environment without mechanical strain.

Disposal Procedures

Guidance on proper disposal of the product according to European Union directives (WEEE).

Installation

Power Supply Preparation

Instructions for preparing the low-voltage (12V) power supply and transformer for connection.

Installation Location

Considerations for selecting a suitable installation place, including temperature and IP class requirements.

Pre-Installation Checks

Steps to take before installation, such as checking for loose parts and using appropriate fastening material.

Installation Steps

Detailed procedures for installing the luminaire, including electrical connection and securing the unit.