SLYK Pillow Stand - User Manual

Pillow Stand Instruction Manual
1 of 2
Introduction
Thank you for purchasing the SLYK® Pillow Stand. This is a unique, patent-pending product that will transform how you
use your smart devices hands-free.
By being attached firmly via the adjustable belt to household cushions or pillows, the Pillow Stand will enable use of your
devices anywhere around your home, whilst you are at your leisure. It has been designed and perfected to be practical,
easy to use and hold your devices securely. The pillow/cushion is not included, to allow you to use your own.
The Pillow Stand works best on a 45cm x 45cm cushion/pillow, that is firm enough not to deform when the strap is
tightened, so select one that is appropriately sized.
The SLYK® Pillow Stand has been designed to work best with Apple iPhones and iPads but can be used with any other
smartphone or tablet with a single centralised button.
Use Note 1: Some of our customers like to remove the belt and use the Pillow Stand as a desk or table stand. This works
perfectly but please note that if the belt is removed, it will not easily be repositioned and so this removal should be seen as
a permanent change to the product not a temporary repurposing.
Use Note 2: If your device has a thin case you can insert this most easily into the pillow stand by dropping the face of the
device towards you, placing the front of the base of the device on top of the Pillow Stand’s ‘jaws’ and then gently levering
the device into the jaws, by standing the device upward whilst gently pushing it down, until it is resting against the raised
back jaw and comfortably and securely held.
Assembly
The Pillow stand comes fully assembled and attaches easily to a suitable cushion/pillow, as illustrated below.
The Pillow Stand works best on a 45cm x 45cm cushion/pillow, that is firm enough not to
deform when the strap is tightened, so select one that is appropriately sized.
Undo the strap.
Place the strap around the selected cushion/pillow.
Secure with the hook and loop strap by gently pressing the two surfaces together.
Reverse the cushion/pillow and adjust to a central position.
Put your device securely in the stand.
Care of your product
The silicone cover on the Pillow Stand is a supple material so it needs to be handled with care. It can attract dust and
other small particles and should only be wiped clean with a soft damp cloth, free of cleaning products.

Summary

Introduction to SLYK Pillow Stand

Product Overview and Usage

Transforms how you use smart devices hands-free via adjustable belt attachment to cushions.

Recommended Cushion Size

Works best on a firm 45cm x 45cm cushion/pillow for optimal strap tightening.

Device Compatibility

Designed for Apple iPhones/iPads but works with other smartphones/tablets with a central button.

Note: Desk or Table Stand Conversion

Belt removal for desk use is a permanent change, not temporary repurposing.

Note: Inserting Device with Case

Insert device face-first, lever gently into jaws for a secure fit.

Assembly and Attachment

Attaching to Cushion;Pillow

The pillow stand attaches easily to a suitable cushion/pillow with its assembled strap.

Strap Securing Process

Undo the strap, place it around the cushion, and secure with hook and loop fastener.

Final Positioning and Device Placement

Reverse the cushion, adjust for central position, and place your device securely in the stand.

Care of Your SLYK Product

Silicone Cover Handling

The silicone cover is supple and requires careful handling; clean only with a soft damp cloth.

Important Cautions and Safety

Environmental and Material Precautions

Avoid high/low temperatures, direct sunlight, abrasive cleaners, rough surfaces, and sharp objects.

Device Handling and Stability

Do not force devices, immerse in water, or use on tilted pillows to prevent separation or damage.

Child Safety and Supervision

Not suitable for children under three. Children under 14 require adult supervision during use.

Warranty and Returns Policy

Limited Warranty Details

Covers defects in material/workmanship for 30 days; excludes damage from misuse or natural causes.

Return Eligibility and Process

Items can be returned within 30 days if unused, in original condition, with proof of purchase.

Refund Procedure

Refunds are issued to the original payment method after inspection and approval of returned items.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Warranty and Returns

The SLYK® Pillow Stand is a unique, patent-pending product designed to transform how users interact with their smart devices hands-free. It functions by securely attaching to household cushions or pillows, enabling device use anywhere around the home while at leisure. The design prioritizes practicality, ease of use, and secure device retention.

Function Description:

The primary function of the SLYK® Pillow Stand is to provide a stable, hands-free viewing platform for smartphones and tablets. It achieves this by utilizing an adjustable belt that firmly attaches the stand to a cushion or pillow. This allows the user to position their device at an optimal viewing angle without needing to hold it. The stand is designed to work best with Apple iPhones and iPads but is compatible with any other smartphone or tablet featuring a single centralized button.

Important Technical Specifications:

• Compatibility: Optimized for Apple iPhones and iPads, but compatible with any smartphone or tablet with a single centralized button.
• Recommended Pillow/Cushion Size: Works best with a 45cm x 45cm cushion/pillow that is firm enough to prevent deformation when the strap is tightened.
• Attachment Mechanism: Adjustable belt with a hook and loop strap for secure attachment to cushions/pillows.
• Material: Features a silicone cover, which is a supple material requiring careful handling.
• Assembly: The product comes fully assembled.
• Dimensions (Pillow Stand): The Pillow Stand works best on a 45cm x 45cm cushion/pillow, that is firm enough not to deform when the strap is tightened, so select one that is appropriately sized.
• Company Information: SLYK LTD, Registered in England and Wales, Company Number: 11703977. Registered Address: 16 Beaufort Court, Admirals Way, Canary Wharf, London, E14 9XL.

Usage Features:

• Hands-Free Operation: Allows users to enjoy their smart devices without needing to hold them, enhancing comfort and convenience.
• Versatile Placement: By attaching to cushions or pillows, the stand can be used in various locations around the home, such as on a sofa, bed, or floor.
• Secure Device Holding: The stand's "jaws" are designed to securely hold devices. For devices with thin cases, the recommended insertion method involves dropping the device face towards the user, placing the front of the base on top of the "jaws," and then gently levering the device in by standing it upright and pushing it down until it rests against the raised back jaw.
• Adjustable Positioning: The stand can be adjusted to a central position on the cushion/pillow after the strap is secured.
• Alternative Use (Desk/Table Stand): Some users prefer to remove the belt and use the Pillow Stand as a desk or table stand. However, this removal is considered a permanent change, as repositioning the belt after removal can be difficult.
• Caution Regarding Tilting: If the pillow is tilted, the device may separate from the Pillow Stand. Users should position and hold the pillow upright at all times to prevent the device from slipping or falling.
• Child Supervision: The product is not suitable for children under three years of age. If used by children under 14, supervision is required at all times. It is not designed as a toy.
• Environmental Consideration: The product is capable of being recycled, though acceptance at local recycling centers or collection services is not guaranteed, nor does it signify that the product is made from recycled materials.

Maintenance Features:

• Cleaning: The silicone cover should only be wiped clean with a soft, damp cloth, free of cleaning products.
• Avoid Abrasives: Do not use abrasive or bleach-based products for cleaning, as these can damage the silicone.
• Gentle Handling: The silicone cover is a supple material and needs to be handled with care. Avoid using on rough surfaces, as this may damage the cover.
• Protection from Sharp Objects: Do not place sharp objects near the silicone cover to prevent damage.
• Temperature and Sunlight Exposure: Do not expose the product to high or low temperatures or prolonged direct sunlight, as this can damage its components.
• Water Immersion: Do not immerse the product in water.
• Device Insertion Care: Do not force devices into the Pillow Stand's jaws or slide them sideways, as this may damage the silicone.

Warranty and Returns:

• Limited Warranty: A 30-day warranty covers defects in material or workmanship under normal use. SLYK will repair or replace defective products or parts using new or refurbished components. The warranty period for a replacement or repaired item is the remaining 30 days from the original purchase date.
• Warranty Exclusions: The warranty does not cover issues caused by natural disasters, user negligence, unauthorized modifications, theft, or loss of the product.
• Returns Policy: Items can be returned within 30 calendar days from the receipt date. To be eligible, the item must be unused, in the same condition as received, in its original packaging, and accompanied by a receipt or proof of purchase.
• Refunds: Upon receipt and inspection of the returned item, SLYK will notify the user of the refund status. Approved refunds will be issued to the original method of payment within the card issuer's policy timeframe.

SLYK Pillow Stand Specifications

General

Brand	SLYK
Model	Pillow Stand
Category	Tablet Accessories
Language	English