EasyManua.ls Logo

SMA DC SPD KIT7 T1T2 - 1.5 Symbols in the Document; 2 Safety; 2.1 Intended Use; 2.2 IMPORTANT SAFETY INSTRUCTIONS

SMA DC SPD KIT7 T1T2
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Safety
SMA Solar Technology AG
Quick Reference Guide STPxx-50-DC_SPD_KIT-xx-IS-xx-11 5
1.5 Symbols in the Document
Icon Explanation
Information that is important for a specific topic or goal, but is not safety-rele-
vant
Section in which the installation and commissioning process is illustrated
graphically.
2 Safety
2.1 Intended Use
The product must only be installed in the following SMA inverters:
Spare-part set Inverter
DC_SPD_KIT7_T1T2
DC_SPD_KIT7_T1T2SV
DC_SPD_KIT6-10
DC_SPD_KIT6-10-SV
STP 12-50 (Sunny Tripower X 12)
STP 15-50 (Sunny Tripower X 15)
STP 20-50 (Sunny Tripower X 20)
STP 25-50 (Sunny Tripower X 25)
STP 20-US-50 (Sunny Tripower X 20-US)
STP 25-US-50 (Sunny Tripower X 25-US)
STP 30-US-50 (Sunny Tripower X 30-US)
Use SMA products only in accordance with the information provided in the enclosed
documentation and with the locally applicable laws, regulations, standards and directives. Any
other application may cause personal injury or property damage.
Any use of the product other than that described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient, dry place for future reference and observe all instructions contained therein.
This document does not replace any regional, state, provincial, federal or national laws, regulations
or standards that apply to the installation, electrical safety and use of the product. SMA Solar
Technology AG assumes no responsibility for the compliance or non-compliance with such laws or
codes in connection with the installation of the product.
2.2 IMPORTANT SAFETY INSTRUCTIONS
Keep the manual for future reference.
This section contains safety information that must be observed at all times when working.
The product has been designed and tested in accordance with international safety requirements. As
with all electrical or electronical devices, there are residual risks despite careful construction. To
prevent personal injury and property damage and to ensure long-term operation of the product,
read this section carefully and observe all safety information at all times.
ENGLISH

Table of Contents