Operations
1.Switch button: long press to power on / off. "SmallRig" logo
appears on the LCD screen after power on. In power on mode,
short press to enter mute mode, and short press again to enter
normal mode.
2.Low cut function: short press the low-cut button to turn on / off
the low-cut function. When the low cut function is turned on, the
LCD screen displays the low-cut symbol.
3.Manual pairing: long press the "low cut/pairing" button to enter
pairing mode. When rebooting TX and entering pairing mode, the
signal display symbol will be dynamically displayed until it is
paired with the receiver (RX).
4. Charging function: the TX can be charged by connecting the
cable through the storage case or directly through the USB-C
charging cable, with charging dynamics displayed on the LCD
screen while charging.
Receiver
To Next Page
Loading...