Features
The RFID tags utilize an induced antenna coil voltage for
operation. The memory chip on the RFID card contains
a unique identication code. This code can be sent when
it’s placed close to the RFID reader of control panel. Due
to low power consumption of the logic core, no supply
buffer capacitor is required. The RFID tag enables to disarm
the alarm system and automatically opens the connected
electronic door lock.
Appearance
Key Chain
Specications
Built-in Circuit: EM4100 CMOS circuit
Operating Frequency: 125 KHz
Dimensions (Lx Wx H): 30 × 30 × 6 mm
Case Material: Plastic Compound
To Next Page
Loading...