To Next PageTo Next Page
Need help?Do you have a question about the Smart Caregiver 433-CMU-40 and is the answer not in the manual?
Icons indicating AC adapter status, battery level, and signal reception.
Instructions for adjusting language or tone options on the Central Monitor.
Instructions for adjusting the alarm volume level on the Central Monitor.
Steps 1-4 outlining the initial setup for programming components.
Instructions to program the 433-NC Nurse Call Button to the CMU.
Instructions to program CordLess Bed & Chair Sensor Pads to the CMU.
Instructions to program CordLess Weight-Sensing Floor Mats to the CMU.
Instructions to program the 433-MS Motion Sensor to the CMU.
Steps to program the 433-EXT Window/Door Exit Alarm to the CMU.
Steps to program the 433-NCA Nurse Call Adapter to the CMU.
Information on programming the 433-RB Caregiver Reset Button.
Information on programming the 433-PRB Caregiver Pager.
Details about the 433-PGD Caregiver Pager, noting no programming is needed.
Final steps to lock the CMU and test components after programming.
How to reset the CMU using the reset button on its front.
How to reset the CMU using a programmed Caregiver Pager with reset button.
Troubleshooting common programming problems like flashing numbers and component errors.
Information on the operational range between CMU and components.
How to switch the CMU from siren alarm to call tone.
Using a CMU Silencer Pin to silence alarm tone, with number flashing on screen.
Notes on wireless technology, range testing, and system limitations.
Warning that the device is not a substitute for supervision and may not prevent falls.
Details on seller's warranty, limitations, and liability disclaimers.
Contact details and company statement on customer service satisfaction.
Notes on low power, AC adapter use, programming interference, and environment.
General| Brand | Smart Caregiver |
|---|---|
| Model | 433-CMU-40 |
| Category | Measuring Instruments |
| Language | English |
