Smart I DIS-4X-INTAS User Manual

Page 1 o
f 19
Door Interlock Systems
Installation & Operation Manual
(DIS-4X-INTAS; DIS-4SV-INTAS; DIS-2X-INTAS)
Door Interlock Systems revised Ver. 2.0
On date 31 Jan 2019
Due to continuous technology up-gradation, product specifications and features are
subject to change without notice at any time.
It is Smart I’s goal to supply accurate and reliable documentation. If you discover a
discrepancy in this document or Need Help, please e-mail your comments to
support@smartisystems.com

Smart I DIS-4X-INTAS Specifications

General

Core	ARM Cortex-M4
Operating Temperature	-40°C to +85°C
ADC Channels	16
DAC Channels	2
Communication Interfaces	USB, I2C, SPI

Summary

Warning and Caution

Important Instructions

Key safety and installation guidelines for proper system operation and user protection.

Product Specification

Master 2-DIS Board Connection Details

Master 4-DIS Master Board Connection Details

Slave 4-DIS Slave Board Connection Details

4 DIS PCB Connector Details

Door 1-4 Connector Pinout Details (J9-J12)

Details pin assignments for connectors J9 through J12 on the DIS PCB.

Door 1-4 Relay/Contact Pinout Details (J13-J16)

DIS-FP1-Alembic Connection Details

System Operation

DIS-FP1-Alembic Connection with 4 Door DIS Board

Keypad Function Details for 4 DIS system

Emergency Door open Setting

Configures how doors behave during an emergency door open event.

DIS Integration with Access Controller System

Connection DIS with Access Control