2 7
Umbrella Style Fountain Assembly
4
1
2
2
4
3
1. Attach the main bowl to the pedestal. Align the marks
and turn to lock in place.
2. Place the solar panels in the recesses provided
running the cables through the holes in the side.
3. Connect the solar panels to the pump taking care to
ensure the connectors are water tight. Slightly twist
when pushing together, ensure the red o-ring remains
in it’s groove and is not displaced (see images below)
4. Connect the hose from the umbrella statue to the
pump and lower it into place. Ensure the pump and
cables are nearly stored in the recess provided.
5. Fill the main bowl with water.
Note: Water must be regularly topped o. We recom-
mend regularly changing the water to ensure it remains
clean and free from debris.
4
If the tubing become blocked, rinse
through with water.
Remove umbrella to access tube. If the tubing
become blocked, rinse through with water.
To maintain optimum performance,
regularly clean the solar panel using water
or glass cleaner in conjunction with a
non-abrasive sponge or cloth.
Umbrella
Sculpture
Maintenance
5
To Next Page
Loading...
