EasyManua.ls Logo

Smart Solar 10392M01 - Fountain Positioning; Sunlight Exposure Requirement; Optimizing Panel Orientation

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
5
.
Performance
This product is designed primarily to operate in summer months but will also work in spring and autumn
provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.
In bright direct sunlight your pump will work well
with a consistent fountain height and flow rate.
In slightly cloudy conditions your pump will work
however fountain height and flow will vary as
clouds pass in front of the sun.
At night the solar panel does not generate
power and your pump will NOT work.
In overcast conditions the solar panel does not
generate enough power to run the pump and it
will NOT work.
In bright direct sunlight your pump will work well
with a consistent fountain height and flow rate.
In slightly cloudy conditions your pump will work
however fountain height and flow will vary as
clouds pass in front of the sun.
At night the solar panel does not generate
power and your pump will NOT work.
In overcast conditions the solar panel does not
generate enough power to run the pump and it
will NOT work.
In order to minimize the
chances of the finial shading
one of the solar panels ensure
that the fountain is south facing.
If shading does occur simply
rotate the fountain until the
panels are in sunlight.
S
E or W
Position
Position your fountain so that receives direct sunlight. The fountain will NOT work
if the solar panels are in a shaded area.
.
Sculpture
Umbrella
4
4
4
4
Warnings
0°C/32°F
Important!
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
Frost causes damage, store whole product inside during cold weather.

Related product manuals