To Next PageTo Next Page
Need help?Do you have a question about the Smart Start AS-2472TWU and is the answer not in the manual?
General| Brand | Smart Start |
|---|---|
| Model | AS-2472TWU |
| Category | Remote Starter |
| Language | English |
Recommended settings for blower motor fan for next remote start.
Ensure wiper and headlight switches are OFF before remote start.
Table detailing button presses, icons, sounds, and instructions for basic operations.
Steps to access the remote's advanced function menu and navigate options.
Guide on navigating, selecting, increasing/decreasing values, and saving menu settings.
Countdown feature for parking meters, with setup and activation details.
Setting up the built-in alarm clock on the LCD remote control.
How to set up and activate Cold Weather Mode for engine starting.
Procedures to put the system into and out of Valet Mode.
How to schedule a remote start for a specific pre-programmed time.
Feature to lock the transmitter keypad to prevent accidental button presses.
Setting the backlight color of the LCD remote to 8 different colors.
Feature to automatically turn off the LCD screen to save battery life.
Setting the current time on the remote control.
Setting to read temperature in Celsius or Fahrenheit.
Option to set the remote's language to English or French.
Programming the side button for various functions like Panic, Stop, or AUX.
Automatic keypad locking after inactivity to prevent accidental presses.
LCD illumination when LOCK, Unlock, or START is activated.
Procedure to set the vehicle into Ready Mode for remote starting.
Steps to remotely start the vehicle engine.
Procedure for taking over the vehicle after remote start.
How to arm and disarm the starter kill feature for security.
Details on how the starter kill arms and disarms automatically or manually.
Details on how the starter kill arms and disarms requiring user intervention.
Using the remote to lock and unlock vehicle doors and arm/disarm the system.
Opening the trunk remotely using the transmitter button.
Keeping the engine running while doors are locked for short stops.
Idle mode variation for Push-To-Start vehicles.
Procedure to set Valet Mode using the ignition key.
Procedure to set Valet Mode using the transmitter.
Steps to activate Cold Weather Mode for both 2-way and 1-way remotes.
Methods to deactivate Cold Weather Mode.
How to check if Cold Weather Mode is active.
Automatic door locking/unlocking based on ignition status.
Relocking doors after the factory security system is disarmed for remote start.
Preventing accidental remote starts, especially by children.
Programmable engine run durations for gas and diesel engines.
Allowing the turbocharger to idle down after user leaves the vehicle.
Remotely setting the vehicle to a no-remote-start mode for indoor parking.
Procedure to disable Home Valet™ mode.
Unlocking only the driver's door with a single press.
Programming the horn to confirm remote actions or activate panic mode.
Button combinations to control a second vehicle.
Steps to arm the vehicle's OEM-style alarm using the transmitter.
Steps to disarm the vehicle's OEM-style alarm.
Reference to page 6 for a complete list of available menu options.
Accessing features like AUX 2, Cold Weather mode, Swap Start, Temp request.
Controlling both vehicles equipped with the same remote starter.
Installer-added features like radio control or opening sliding doors.
