Safety
Strictly follow the instructions for use. Any use of the SSI-2035 device requires the full
understanding and strict observation of these instructions. The device is to be used only for the
purpose specified in this manual.
Any changes and/or additions to the SSI-2035 device may cause the device to malfunction or be
damaged. Such changes and/or additions invalidate any or all warranty of the device or vehicle.
To protect against electrical shock and fire, maintain a secure connection of all components to the
SSI-2035. Do not cut any cables connected to the SSI-2035 as this could result in electrical shock or
fire.
The installation may only be carried out by an authorized Smart Start, LLC Service Center
according to the instructions for installation. Service and maintenance must only be performed by
qualified persons.
The liability for the proper function of the instrument is irrevocably transferred to the owner or
operator to the extent that the instrument is serviced or repaired by personnel not employed or
authorized by Smart Start, LLC or if the instrument is used in a manner not conforming to its
intended use.
Do not place the interlock where it is prone to damage: on the floor, under your ashtray, or where
you can’t see or hear it. Also, do not expose the unit to moisture from liquids. You are liable for all
damages due to negligence or abuse of the device.
Do not tamper with the device. This will result in additional charges and notification to appropriate
monitoring authorities.
Smart Start LLC cannot be held responsible for damage caused by non-compliance with the
recommendations given above. The warranty and liability provisions of the terms of sale and
delivery by Smart Start, LLC are likewise not modified by the recommendations given above.
To Next Page
Loading...