Need help?Do you have a question about the Smart Tweezers ST5-S and is the answer not in the manual?
General| Brand | Smart Tweezers |
|---|---|
| Model | ST5-S |
| Category | Measuring Instruments |
| Language | English |
Provides an overview of the device controls and capabilities.
Explains the use of the navigation switch for device operation and selection.
Details how to change test parameters or modes using the navigation control quickly.
Explains how to move the cursor and select menu items.
Used to access System menu, Measurement menu or restore default settings.
Sets the measurement mode for the device, e.g., Resistance, Capacitance, Inductance.
Allows setting the desired test frequency for measurements.
Used to set the secondary display parameter (R, D/Q).
Discusses small resistance offset due to tips and contact resistance.
Details test frequency, amplitude, and ranges for capacitance measurements.
Lists technical specifications like test frequency, accuracy, and signal levels.
Describes typical offset values for resistance, capacitance, and inductance.
Details the measurement ranges and corresponding test frequencies for parameters.
To Next Page
