Need help?Do you have a question about the Smart Witness SVC100GPS and is the answer not in the manual?
General| Video Resolution | 1080p |
|---|---|
| GPS | Yes |
| Storage | MicroSD card up to 32GB |
| Connectivity | USB |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| Battery | Built-in |
Provides crucial safety warnings regarding electric shock, opening the unit, and exposure to moisture.
Describes the SVC100GPS-LCA/-LCA2 as a journey/accident recorder with shock sensor & GPS, detailing its features.
Guides users through installing the Smart Witness PC Viewer software on Windows operating systems.
Explains how to insert an SD card and format it using the Smart Witness Software for initial setup.
Provides step-by-step instructions for the DIY installation of the SVC100GPS model.
Explains the various recording modes including auto start, event, manual, and continuous recording functions.
Details how to play back individual or continuous recordings from the loaded file list within the PC Viewer.
Introduces the Enhanced Driver Report (EDR) function for analyzing driving data like speed, G-sensor, and GPS.
Explains how to generate a daily driver report that analyzes distance, speeds, G-Forces, and provides scores.
Guides users on setting analysis criteria such as speed limits, eco-speed limits, and acceleration/deceleration thresholds.
Explains how to set grading criteria for various parameters to determine driver scores and grades.
Details how to set numerical scores and weights for each grading category to calculate driver performance.
Explains how to set the G-Sensor to automatically adjust relative to vehicle speed for better incident recording.
Lists the technical specifications of the device, including image sensor, resolution, recording time, and power input.
Outlines the procedure for upgrading the device's firmware, including preparation and upgrade steps.
To Next Page