Resetting the side windows
You must reset each side window if:
R
the side window opens again slightly after
being closed fully.
R
the side window can no longer be fully
opened or closed.
X
Close all the doors.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y page 58).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side
window is completely closed (
Y page 58).
X
Hold the switch for an additional second.
X
If the respective side window remains
closed after the button is released, then it
has been set correctly. If this is not the
case, repeat the steps above again.
Side windows
59
>> Opening and closing.
Z
To Next Page
Loading...
