OFFLINE SCN CODING - AR54.21-P-0013-04MCC
The following work instructions describe the procedure for offline SCN coding.
Precondition for offline SCN coding:
l STAR DIAGNOSIS diagnosis system with printer and fax machine
l Correct adjustment of date and time in STAR DIAGNOSIS
l Special equipment which was subsequently installed in or removed from the vehicle, must be
redocumented in the vehicle documentation system (FDOK).
Offline SCN coding
1. Confirm note on sequence of SCN coding with the "F2 button".
2. Prepare the inquiry form by pressing the "F4 button".
3. Print out inquiry form by pressing the "F11 button".
4. Send the printed-out inquiry form to fax number +49 180511 6373.
The inquiry result must be faxed back immediately.
5. Enter "coding string", "SCN" and "check digit [2]" in the corresponding input fields in the diagnosis
assistance system and confirm with the "F3 button".
6. Once the coding process has finished the event log on the documentation of the repair order appears.
This event log must be filled in completely, then printed out with the "F11 button" and enclosed with
the repair order.
7. Finish SCN coding by pressing the "F2 button".
SCN coding of the control unit is thus successfully concluded.
PERFORM INITIAL STARTUP OF CONTROL UNITS - AR54.21-P-0018MCE
MODEL 451.3/4
Startup
1 Connect Star Diagnosis AD00.00-P-2000-
04MCC
2 Enter vehicle identification
number in Diagnosis Assistance
system (DAS) and open main
menu with "F2" button
3 Select menu "Systems" in main
menu and confirm with "Button
F3"
4 In the "Systems" menu, select the
control unit for initial startup and
confirm with the "F3" button
An "initial startup" is required
when replacing the following
control units:
l Instrument cluster (A1)
2010 Smart Fortwo Passion
2009 ACCESSORIES & BODY, CAB Electrical System, Equipment & Instructions - Fortwo (Cabrio)
15 октября 2019 г. 19:12:10 Page 35 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
Need help?
General
