SMART Fortwo coupe - Brake Lamp; Replacing

Replacing bulbs
260 >> Practical hints.
High mounted brake lamp
1 Retaining screws
2 High mounted brake lamp
3 Bulb socket
>Removing: Unscrew retaining screws
1.
> Remove high mounted brake lamp
2.
> Detach the electrical connector from bulb
socket
3.
> Turn the bulb counterclockwise and pull it
out of its socket.
>Installing: Install in the reverse order.
License plate lamps
1 License plate lamp unit jacking point
> Use a suitable tool to loosen the corre
sponding license plate lamp unit at jacking
point
1.
> Carefully unclip the license plate lamp unit.
2 Electrical connectors
3 Bulb
> Detach electrical connectors
2.
> Remove bulb
3.
> Insert the new bulb.
> Attach electrical connectors
2.
> Fit the license plate lamp unit on the right
and press gently on the left.
The license plate lamp unit must audibly
engage.
P82.10483831
G Warning!
High outside temperature, stopandgo
traffic, driving on long uphill grades, or
driving at high engine speed may increa
se the temperature in the engine com
partment. Therefore the area around the
air slots in the rear apron may be hot. Let
the engine cool off before touching this
area to prevent burns.
P82.10499931