Need help?Do you have a question about the SMART J4 and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Model | SMART J4 |
| Connection | Bluetooth 5.0 |
| Charging Time | 2 hours |
| Weight | 20g |
Tap '+' to add a new device in the CloudEdge app.
Choose the doorbell from the device list during setup.
Verify the doorbell's power level before proceeding.
Follow steps to activate the doorbell functionality.
Instructions for resetting the doorbell device.
Enter your Wi-Fi network name and password.
Get the doorbell ready for scanning the QR code.
Display the QR code for the doorbell to scan.
Allow time for the doorbell to connect to the network.
Confirmation screen after the device is added.
Procedure to reset and pair the chime with the doorbell.
Adjust ringtones, volume, and other chime settings.
To Next Page