Need help?Do you have a question about the SMART TCX624 and is the answer not in the manual?
Explains time correction for HF drivers and CD horn compensation for screen attenuation.
Details the 500 Hz crossover frequency and 24 dB/octave slope.
Describes the time delay between HF and LF drivers and its correction.
Mentions jumpers to adjust delay for speaker alignment.
Guidelines for mounting the TCX624 in an equipment rack.
Steps for setting HF levels and achieving smooth response.
Explains the bypass mode and its protection features.
Details mechanical adjustments and jumper settings for time correction.
Provides a chart for delay settings and notes on wiring.
Instructs operators on using the bypass button for troubleshooting.
To Next Page
General