Need help?Do you have a question about the SmartAnt SAA04-05224A and is the answer not in the manual?
Provides step-by-step instructions for the physical installation of the device.
Introduction to the utility for configuring wireless settings of the device.
Explains how to use a web browser to configure the device's settings.
Guide to modifying AP settings like SSID, channel, mode, and security.
Instructions for setting up WEP encryption for wireless network security.
Steps to secure communication using TKIP (WPA) encryption.
Allows control of wireless traffic by specifying MAC addresses of allowed clients.
Details on upgrading the device firmware and changing the logon password.
Steps to change the administrative logon password for the device.
Instructions for modifying basic Ethernet adapter settings like SSID and operating mode.
Selecting the method for securing wireless communication.
Setting the encryption method for wireless network security.
Entering the passphrase for secure wireless connections.
Displays station status and allows scanning/saving wireless networks.
Utility to restore the device firmware in case of a failed upgrade.
Steps to troubleshoot the issue of the device not powering on.
Guidance for troubleshooting WLAN card association problems with the device.
Steps to resolve issues accessing the device's web configuration page.
Troubleshooting steps for a continuously blinking Power LED on the device.
To Next Page
General