SmartBidet SB-2600 User Manual

SB-2600
Quick Installation Guide
20.4”
6.4”
11.4”
8.1”
14.5”
14.9”
Remove your existing toilet seat, lid, and accessories and store them away.
The toilet dimensions must be within those shown
below. Do not install this unit on a toilet that does
not meet these dimensional requirements.
Place the base plate and bolt cases over each
toilet mounting hole. Insert the mounting bolts
through the base plate and toilet mounting holes.
Screw in the nuts onto the mounting bolts.
This model fits both elongated and round toilets.
There may be a slight overhang for certain
round toilets.
1
2
3 4
Bidet DimensionsToilet size (Elongated)
How to mount the base plate How to attach and detach the unit
1.
Base plate
Bolt case Nut
Mounting bolt
Slide the unit until it
clicks into the base plate.
Lift the unit up
and forward.

SmartBidet SB-2600 Specifications

General

Brand	SmartBidet
Model	SB-2600
Category	Toilets
Language	English

Summary

Toilet Size and Bidet Dimensions

Elongated Toilet Size Requirements

Specifies dimensional requirements for the toilet to ensure proper fit for the bidet unit.

Bidet Compatibility Dimensions

Details the dimensions of the bidet unit and its fit for both elongated and round toilets.

Installation Steps

Mounting the Base Plate

Instructions on placing the base plate, mounting bolts, and securing with nuts.

Attaching and Detaching the Unit

Guidance on how to securely connect and disconnect the bidet unit from the base plate.

Water Connections and Final Checks

Connecting Water Supply

Step-by-step guide to connect the water supply, including T-valve installation and hose connections.

Functionality Check

Procedure to verify all bidet functions after installation, ensuring no leaks or malfunctions.