SMARTBOT Robust 2800 - Quick Setup and Operation; Step-by-Step Installation

Quick Guide
STEP 1 – INSTALLATION
STEP 4 – PLUG INTO GFCI OUTLET
Select the correct 2" connector (elbow
or straight) and adaptor (1-1/2”, 1-1/4”,
1”, 3/4”) and install them as instructed.
STEP 2 – CONNECT GARDEN HOSE
STEP 3 – PLACE IN WATER
Requires 2” of water to start pumping.
It removes water down to 1/16” of surface.
05