06
1/16" Auto O
2" Auto On
5-1/2" Auto O
Auto-Flo Instructions
Smartbot's US patented Auto-Flo system
has industry-leading liquid-sensing
technology that can detect as little as 2” of
oodwater. Once the water is detected,
Smartbot automatically activates to pump
the water out. When the water level
reaches approximately 1/16” above the
surface, Smartbot safely turns itself o.
Note: Removing water level depends on
many factors. Only on a levelled surface
can water be removed to a depth of
approximately 1/16".
Normal straight status:
The pump stops working automatically if it
topples over and the water level is lower
than the impeller. This happens because
of its skilled and scientic design.
Knock-over status:
To Next Page
Loading...