SmartDrive Systems SR4 - Page 5

© 2019 SmartDrive Systems, Inc. All rights reserved. SmartDrive, the SmartDrive logo, and Measured Safety Program are registered trademarks of SmartDrive
Systems, Inc. SmartDrive SmartIQ is a trademark of SmartDrive Systems, Inc. All other marks are the property of their respective owners.
Rev 2, 4/23/2019
11. Replace the controller’s top cover
12. Mount the controller into the controller’s bracket and secure the two screws with the M4
wrench
a. Secure the cable with zip ties to keep the cable clear of the driver’s operation