Smartech HPR-2000
USER GUIDE PAGE 12
3. Screw in the back portion of the ashlight.
See Figure J. Your ashlight is ready to use!
Figure J.
Warning:
Do Not attempt to charge your HPR-2000 when using non-
rechargeable C batteries. The C batteries are not meant to
be recharged and may burst if the charger is connected,
causing damage to your ashlight.
If you use rechargeable C batteries, charge them with
an external battery charger only. Do not use the built-
in charging system as it is meant to work only with the
Smartech Lithium-Ion battery.
To Next Page
Loading...