Smartech WBC-250 - User Manual

Smartech WBC-250

22 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operator’s Manual

Manual del Usuario

CAUTION:

Read and follow all safety

rules and operating instructions

before every use of this product.

SAVE THESE INSTRUCTIONS.

ATENCIÓN:

Lea y siga todas las reglasde

seguridad e instrucciones de uso

antes de cada uso de este producto.

GUARDE ESTAS INSTRUCCIONES.

12V/6V, 250A Battery Charger &

Engine Starter

Model/Modelo WBC-250

Temperature Controlled

Cargador de batería 12V / 6V, 250A

Motor de arranque

Table of Contents

Questions and Answers

A
Ashley ReevesJul 28, 2025
What to do if my Smartech Battery Charger shows OVER-TEMP?
- K
  Kim FreemanJul 28, 2025
  If the Smartech Battery Charger displays 'OVER-TEMP', it means the overheat protection has been activated. The current reduces when the charger's internal temperature is too high. After the charger cools down for a few minutes, it will automatically resume charging at the 6/2A CHARGE/MAINTAIN rate if a battery is connected, the battery type has a memory function, and it's the same type as before.
D
Darrell BakerAug 7, 2025
What to do if Smartech Battery Charger displays NO-CONNECT?
- L
  lawrencebryanAug 7, 2025
  If your Smartech Battery Charger displays 'NO-CONNECT', there are several potential reasons: * **Open-circuit:** Ensure the red and black clamps are properly connected to the battery posts. * **Dirty Battery Posts:** Clean the battery posts to ensure a good connection. * **Dead Battery:** If the battery voltage is below 1V, replace it immediately. * **Output short circuit:** Disconnect the red and black output terminals.
M
Maria BrennanAug 18, 2025
How to fix REVERSED display on Smartech Battery Charger?
- M
  matthew33Aug 18, 2025
  The 'REVERSED' display and lit 'REVERSE CONNECTION' LED on your Smartech Battery Charger indicate reverse polarity. To fix this, change the red and black clamps to the correct battery posts.

Summary

Important Safety Instructions

Safety Precautions for Battery Handling

Guidelines for working safely in the vicinity of batteries to prevent explosions and injuries.

Safety Precautions for Charger Operation

Power Cord and Extension Cord Usage

Control Panel Functions

Battery Type Selection

Rate Selection Button

Charger Technical Specifications

Engine Start and Error Handling

Engine Start Function

How to use the engine start feature for jump-starting a vehicle.

Error Situations

Common error displays, their causes, and recommended solutions.

Connecting and Disconnecting the Battery

Operating Steps

6 V Battery Charging Process

12 V Battery Charging Process

Testing and Alternator Check

Alternator Check Procedure

Troubleshooting Common Issues

Smartech WBC-250 Specifications

General

Brand	Smartech
Model	WBC-250
Category	Battery Charger
Language	English

Related product manuals

Preview: Smartech WBC-200

Smartech WBC-200