PREPARATIONSFORUSE:
1. Select appropriate brush (Lint, Crease, or Bristle) for
use.InserttheLintBrushbysnappingintoplace.Insert
the Crease Brush by fitting its tabs into the square
openings at the bottom of the plate and pushing the
Brushupwardtillitclicksintoplace.
2. PulltherubberWaterPlugtoopentheWaterTank.
3. Fill tank with water by using the Water Cup.Replace
plug.
4. Plugthecord intoanoutlet.TheredIndicatorLightwill
go on. When the steamer reaches the right
temperature,theIndicatorLightwillgooff.
To Next Page
Loading...