Need help?Do you have a question about the Smarter tools MIG-135 and is the answer not in the manual?
Explains the meaning of symbols used throughout the manual for safety.
Details dangers of electric shock, including preventing contact with live parts and proper grounding.
Introduces additional symbols related to installation, operation, and maintenance procedures.
Provides a warning regarding chemicals in fumes and gases known to cause birth defects or cancer.
Lists key safety standards and publications relevant to welding operations.
Specifies requirements for eye and face protectors, including welding helmets and safety glasses.
Details essential protective clothing for welders, including materials and coverage.
Discusses considerations about welding and the effects of low-frequency electric and magnetic fields.
Explains the general precautionary label found on the unit and packaging.
Details how to identify the unit using nameplates or shipping container numbers.
Provides an overview of the MIG-135 welder, its capabilities, and included accessories.
Lists detailed technical specifications of the MIG-135 welder, including output, input, and dimensions.
Explains the concept of duty cycle and its importance for preventing overheating and maintaining warranty.
Provides safety instructions and methods for transporting the welding power source.
Provides guidelines for choosing a suitable location for the welder, considering environmental factors.
Describes environments with increased hazard of electric shock and their implications.
Details the electrical requirements, including voltage, phase, and recommended circuit protection.
Addresses precautions for electromagnetic compatibility in domestic use and methods to reduce emissions.
Explains conventional operating procedures and initial setup considerations for welding.
Details the DC Electrode Positive setup for MIG welding with diagrams of connections.
Details the DC Electrode Negative setup for Flux Core welding, including polarity changes.
Provides step-by-step instructions on how to switch between MIG and Flux Core welding processes.
Guides the user through the process of installing wire rolls for welding, including diagrams.
Outlines conventional operating procedures and the use of current range values as a guide.
Familiarizes the user with the location and purpose of all controls on the welder's front panel.
Provides a chart and guidance on selecting appropriate welding wire diameters and types based on material thickness.
Identifies the location of the gas connector on the back panel and its importance for MIG welding.
Instructs on the correct way to hold and position the welding gun and electrode for optimal welding.
Details routine maintenance procedures, including cleaning, inspection, and a maintenance schedule.
Provides a table of common welding issues and their corresponding remedies for quick problem-solving.
General| Brand | Smarter tools |
|---|---|
| Model | MIG-135 |
| Category | Welding System |
| Language | English |
To Next Page