EN
12
Display:
B
C D
H
I
J
K
A
J
K
A
Pedestrian mode: pedestrian gear
at 6 km/h makes it easy to push
the scooter.
G
Speed unit switching: When the
meter is on, press the right button
three times to switch between
units km/h and mph
B
Brake: the icon indicates that the
brake has been activated
H
Bluetooth: the icon indicates that
the scooter has been successfully
connected to the device
I
Mileage change: When the meter
is on, double-click the left button
to switch between individual or
total mileage
C
Error: The wrench icon indicates
that the scooter has detected an
error
F
Lock function switch: right click on
the left button 8 times to open the
lock function, the lock scooter
screen icon lights up and the
motor cannot work in the locked
state, press the left button again 8
times to unlock the scooter.
E
Light Switch Control: Click left
button to control the light on/off
D
Non-zero start: the icon indicates
that when the speed of the scoo-
ter reaches 3 km / h, press the
accelerator and the engine starts
working.
Battery level: The battery power is
indicated by 5 bars. Each
accounts for about 20% of a full
battery.
Speed gear: right-click to change
the three gears 1, 2 and 3, dou-
ble-click the right button to switch
to the pedestrian gear, and
double-click back on the original
gear.1
To Next Page
Loading...
