EN
Each smartGyro is equipped with a lithium battery and charger
and has its own serial number. Do not replace the battery or its
charger, it could be dangerous.
Lithium Battery
Please fully charge the battery before using your smartGyro K2
PRO
Charge the battery when its level is at half of the power bar to
avoid influencing your driving.
Charger
The charger's overcharge protection function will automatically
stop the charging process when the battery is 100% full.
Charging instructions:
1. The vehicle must be turned off during charging
2. Connect the charger plug to the mains.
3. Important: plug the charger into a 100V-240V outlet.
4. Red light: charging in progress. Green light: charging process
completed. Please always store the charger in a dry and ventila-
ted environment.
Battery and Charger:
Smartgyro app:
1 Download the Smartgyro APP.
Download the Smartgyro APP. To do this, select your operating
system (Android or Apple) and then select the Smartgyro scooter
model you have purchased: Smartgyro K2 PRO.
In the APP you can turn lights on and off, activate or deactivate
cruising speed and see speed, kilometers traveled, battery, etc.
13
To Next Page
Loading...
