K2- Manual
How to turn on the lights of your
Smartgyro K2:
1. To turn the skate lights on and off,
you need to press the power button
twice.
2. You can also turn the lights on and
off through the APP.
Support:
How to unfold your Smartgyro skate:
1. Unfold the handlebar mast and
adjust it. Then unfold the kickstand to
support the scooter.
Double insurance folding system.
3. Install six screws (two on each
side) with the included hex key.
4. Check that your scooter can be
turned on and off.
2. Firmly connect the wires inside the
handle and the mast. Slide the handle
onto the stem. Be aware of the correct
orientation.
Light towards
the front
smartgyro.es
28
If you have any problem with the
operation, use or assembly of
the product, you can contact us
through: info@smartgyro.es /
+34 91 642 95 20
To Next Page
Loading...
