EasyManua.ls Logo

SmartLab cadspeed - Miscellaneous; Maintenance Guidelines

SmartLab cadspeed
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
IV. Miscellaneous
Maintenance
Do not dump the device or use force while operating it
Avoid exposing the device to high temperatures or direct sunlight.
Do not immerse in water, since this might cause irreparable damage.
Let the device acclimate after having stored it in a temperature close
to zero. Do not immediately use it in such a condition. Do not try to
disassemble the device.
NEVER take the device to pieces by yourself. In this case the warranty
will not be valid anymore. Only the manufacturer or the authorized
trader is allowed to repair the device. Please check the batteries before
any complaint and change them if necessary.
Please clean your device regularly with a wet soft cloth. Use a dry
soft cloth to dry up the device. Do not use caustic cleaning solutions.