To copy multiple pictures at once you can select them
before accessing the Copy Selected function. To select a
photo for copying, highlight it in the thumbnail screen and
press and hold the Up button on the back of the frame.
A check mark will appear in the corner of the thumbnail.
Select all the photos you would like to copy and then press
Exit and Copy Selected as described above.
To copy all photos from one type of memory to another,
press the Exit button on the frame for three seconds.
Highlight Copy All and press OK. The pictures will be copied.
To delete, highlight the file or files as above and select the
delete option from the menu.
Connecting to a computer
Using the supplied USB cable, you can connect your digital
picture frame to a computer to transfer files between the
two devices.
With the frame turned off, connect the small end of the cable
to the frame and the large end to your computer. Turn the
frame on and allow the computer a few moments to
recognize the device. The frame’s internal memory and any
memory cards inserted in the frame will appear as external
storage devices on the computer.
6
To Next Page
Loading...
