1. Plug in Smart Wi-Fi Remote Control into USB
hub or computer. Hold reset button until
indicator light blinks blue rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the “Smart Controller”
from the list of devices to add.
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to
and that the network is a 2.4GHz network.
Enter your password for the Wi-Fi network.
4. Confirm indicator light is blinking and press
the “confirm indicator rapidly blinks” button.
To Next Page
Loading...