PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE’S: 1-888-755-4497
EN
5
PREPARATION
Before beginning assembly or operation of product, make sure all
parts are present. Compare parts with package contents list and
diagram. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact Customer Care
for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
OPERATION INSTRUCTIONS
Step 2. For Model 52467 only,
connect the light to the pump by
pushing the plug into the socket until
it is rmly seated. Hand tighten the
nut from the plug to the socket.
Step 4. Place the pump into
the water and connect to
properly grounded electrical
outlet.
NOTE: This pump will NOT
operate until fully submerged
in water.
Step 1. Adjust the ow control to the
lowest setting. Once the pump has been
turned on (after step 4) you may adjust the
ow control to the preferred setting.
NOTE: If you have Model #52469, skip
to step 3.
1
2
3 4
GFCI
outlet
Step 3. Connect tubing to the outlet
of the pump with the adapter.
NOTE: Tubing not included
To Next Page
Loading...
