VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
EN
8
OPERATION INSTRUCTIONS
2
1
PREPARATION
Before beginning assembly or operation of product, make sure all
parts are present. Compare parts with package contents list and
diagram. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact Customer Care
for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
3
Step 1. Adjust the ow
control to the highest setting.
Once the pump has been
turned on (after step 3) you
may adjust the ow control to
the preferred setting.
Step 2. Connect tubing
to the outlet of the pump
with the appropriate sized
adapter.
NOTE: Tubing not included
Step 3. Place the pump into
the water and connect to
properly grounded electrical
outlet.
NOTE: This pump will NOT
operate until fully submerged
in water.
To Next Page
Loading...
