Smartpond 84577 - Electrical Safety Warnings; Grounding and Voltage Compliance; Cord Inspection and Usage

VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
EN
6
as pumps, tubing, connectors, under-water lighting, and nozzles
to keep them in functional order in line with safety aspects.
However, the maintenance and care obligation is not limited to
the technical products supplied, but encompasses the entire
system.
We also recommend the owner to keep records of the dates
when maintenance and care was carried out, and to document
all water tests made in conjunction with the water feature. The
owner is solely responsible for guaranteeing the safety of the
water feature. Use or maintenance of the units sold and the
system are beyond GeoGlobal Partner’s inuence. GeoGlobal
Partners can only be held liable for manufacturing faults of
smartpond
®
units.
WARNING
• Risk of electrical shock. This pump is supplied with a
grounding conductor and grounding-type attachment plug. To
reduce the risk of electric shock, be certain that it is connected
only to a properly grounded, grounding-type receptacle.
• Do not exceed the voltage shown on the pump.
• Always disconnect pump from the power source before
beginning any maintenance or work on the pump.
• Inspect cord for damage before installation and/or
maintenance. Replace the entire pump assembly if damage is
found.
• Do not remove the grounding pin from the power cord plug.
• To reduce the risk of electric shock, use only on portable, self-
contained fountains no larger than 5 ft. in any dimension.
• Risk of electrical shock –– This pump has not been
investigated for use in swimming pool or marine areas.