PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE’S: 1-888-755-4497
EN
9
OPERATION INSTRUCTIONS
Step 1. Adjust the ow
control to the lowest
setting. Once the pump
has been turned on (after
step 3) you may adjust
the ow control to the
preferred setting.
Step 2. Connect tubing to
the outlet of the pump with
the the appropriate sized
adapter.
NOTE: Tubing not
included
Step 3. Place the pump
into the water and connect
to properly grounded
electrical outlet.
2
3
1
PREPARATION
Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
NOTE: This pump will NOT operate until fully submerged in water.
To Next Page
Loading...
