SmartPower HR-8 - Page 42

Smart Power Systems
®
A. C. MODULAR GENERATOR SYSTEM
Page 41 of 56
WARNING:
Do not bypass the filter or alter filtration plumbing in any way. Doing so will void the
system’s warranty.
3. The system controller automatically records the time from the previous filter change.
The hours since the previous filter change can be accessed using the Command &
Control Center by pressing the Mode button until the following screen appears
(reference Figure 29):
Time Since last Oil Filter
Change in Hours.
Press Mode until 
and  are displayed
Figure 29 - Oil Filter Hours Display