SmartSynch Itron Centron SmartMeter - CENTRON Display Feature; SmartSynch Identifier; SmartMeter Warning Codes; Wireless Coverage Status

CENTRON GPRS SmartMeter User Guide
SMR45-4601A 14
5 CENTRON Display Feature
1. SmartSynch Identifier: In general, the meter program controls the number of displays, associated
fields, and display time. This 3-letter field identifies SmartSynch display among available displays.
Values Description
SSI SmartSynch, Inc.
2. SmartMeter Warning: displays error codes generated by SmartSynch embedded software.
− Normal operations – no errors
1
SmartMeter module’s NVRAM error
2
Read/write failure in the Common Configuration area - NVRAM
3
Read/write failure in the App. Specific Configuration area - NVRAM
4
Actual firmware binary image is corrupted
5
Firmware image decompression error
6
Meter clock deviation is greater than the maximum correction limit
7
Software watchdog triggered – processor is reset
Good. Warning. Error
3. Wireless Coverage Status: coverage status detected by the GPRS modem.
Values Description
1 In coverage: modem can hear the network
0 Out of coverage: modem can’t hear the network
2 Shut-down: modem power is off when temperature is outside [-20C, +70C] range
3 Not Registered: modem is not currently registered to any networks, but is trying to
manually register on its own