7
OPTIONAL:
TO DOOR LOCK
POWER
SUPPLY
T
12V 1Amp MAX
WIRING
Outdoor Intercom
1. Connect the DC power supply to the terminals marked + & - making sure the wires are installed the correct way
around (See image above).
2. If required connect the door lock cables to the 2 terminals making sure a suitable power supply is used to power
the door lock.
(Items DB5005 and DB5005L - Not supplied)
Indoor Monitor
1. Connect the USB lead to the Indoor Monitor base, plug the adaptor into a wall outlet and switch
the wall outlet ON.
EN
To Next Page
Loading...
