3 3
X60 / +X60
8. Maintenance
8.1 Clean and Storage
In order to keep X60 in the best performance please clean your
X60 after use.
You can use the soft cloth dipped in a small amount of water to
clean X60. Glasses wiper cloth is recommended
X60 can be washed by household shower hose or garden hose
(water pressure is less than 1MPa, or 145PSI) to flush tires and
fenders. Please dry it as soon as possible after hosing and place
X60 in a ventilated condition to avoid the iron parts rusting.
If it is difficult to clean some stains on the plastic surface,
toothpaste can be used, using the toothbrush repeatedly scrub,
and then use the wet cloth to clean. This method can also be used
to clear the surface scratch.
When not in use, place X60 in dry and cool place indoor, and avoid
storing X60 outside for long time. Sun exposure and extreme hot /
cold outdoor environment will accelerate X60 aging.
WARNING: When clean X60, make sure it is turned off, the charging cable is unplugged and the charging port is shut!
Otherwise electric shock or serious damage may happen. High pressure hosing or soaking in water are strictly
prohibited in scooter cleaning which may lead to water damage of internal parts and components.
To Next Page