（2）Unplug and plug device
·Restart all home hubs (HomePod, HomePod mini, Apple TV 4K) to control the
blind by unplugging them and then plugging them back into power.
（3）Power off and power on shade
·Hardwired Shades: unplug and then plug them back into power.
·Hazel series of Cellular Shades: unplug the external battery and then plug it
back into power.
·If you choose a battery motor, follow these steps:
Method 1 (orders before May 2024):
1. Press the P button on the back of the remote until the motor jogs once.
2. Press UP+STOP+DOWN for 5 seconds until the motor jogs once.
3. Wait 10 seconds, repeat step 2, and the motor enters working mode.
Method 2 (orders before May 2024):
Press and hold the P button on the back of the remote for 5 seconds until it
jogs twice. Wait 10 seconds for the motor to enter working mode automatically.
5. If you have already confirmed the steps above and it's still not working,
what should you do?
·Please remove the device and add it again or restore the factory reset.
11
To Next Page
Loading...