（）Unplug and plug device
·Restart all home hubs (HomePod, HomePod mini, Apple TV 4K) to control the blind by unplugging
them and then plugging them back into power.
（3）
·Hardwired Shades: unplug and then plug them back into power.
·If you choose a battery motor, follow these steps:
Method 1 (orders before May 2024):
Method 2 (orders before May 2024):
5. If you have already confirmed the steps above and it's s�ll not working, what should you do?
·Please remove the device and add it again or restore the factory reset.
10
To Next Page
Loading...