SMARTWINGS Matter - Page 8

Release the buon, the
red LED light stays on
and is accompanied by
three beeps.
The red LED light stays
on and is accompanied
by three beeps.
UP
Note: 1 ash and
1 beep
Note: 1 ash and
1 beep
Note: 1 ash and
1 beep
SETTING
(P)
SETTING
(P)
Scan the QR code stick on the shade to add it.
Note: Please ensure that the displayed channel on the remote corresponds to the shade
you intend to adjust.When pressing the 'up' button, the 5-channel remote should not
display all 5 indicators lit up，and the 15-channel remote should not show as 0.